Puffco Peak

• Latest version (2026.08)
• 360° ceramic heating in the 3D Chamber
• Four presets from 254 °C to 310 °C
• Ready to draw in about 25 seconds
• Around 30 to 35 dabs per charge
• Borosilicate glass water filtration built in
• One button, no app to set up
• Smallest, lightest Peak at about 250 g

The Puffco Peak is the streamlined electronic dab rig in Puffco's Peak family, sitting below the Peak Pro 3DXL. It brings the same 360° ceramic chamber into a smaller, simpler body. At its price, it is one of the more popular eRigs.

The Peak works with concentrates only: wax, rosin and live resin. It does not vaporise dry herbs. It also stands too tall for a pocket. That size buys you built-in water filtration and a battery that lasts a weekend away.

The Peak stands just over 17 cm tall, measures about 7.5 cm across and weighs around 250 g. That makes it the smallest and lightest Peak so far. The grip area is the width of two or three fingers, so one-handed use feels natural.

A soft matte finish covers the body and stays cool in the hand while the chamber is hot. A hidden LED band wraps the back of the base and fades towards the front. It shows the selected temperature and the battery level. In bright daylight the glow can be hard to read.

No carrying case comes in the box. The foam-lined retail packaging closes with magnetic latches and works well for storage and short trips.

The 3D Chamber is a ceramic cup with heating elements running through its walls. Conventional dab chambers heat only from the floor. The 3D Chamber is more like a fire pit ringed with hot stones: warmth arrives from every direction at once.

You place concentrate on the bottom surface of the chamber. During the draw it melts and spreads, and the heated walls vaporise the material that creeps up them. A chamber with a heated floor only can leave that material unevenly warmed, which shows up in the flavour.

A sensor in the chamber feeds a microprocessor that adjusts power in real time throughout the cycle. The set temperature holds steady from the first second to the last, so one session tastes like the one before it.

The borosilicate glass top holds the water and forms the whole vapour path above the chamber. Two horizontal percolation slits do the filtering. The wide mouthpiece opening keeps the draw airy and easy. The joint is shared across the Peak family, so a wide range of Puffco and aftermarket glass fits it.

Lift the glass off the base and fill it through the mouthpiece. A marked fill line shows the level, and water just above the slits is plenty. Keeping the water level low protects the electronics in the base.

The joystick cap sits on the chamber and stays attached by a tether, so it will not go missing. Swivelling it during the draw steers air around the edges of the chamber and pushes melted concentrate onto the heated walls.

The full-size glass is tall and fairly thin. If you travel with the Peak, the travel glass (sold separately) is worth adding.

A single click cycles the four presets, each with its own colour: Blue at 254 °C, Green at 266 °C, Red at 277 °C and White at 310 °C. Puffco calls the hottest setting "Peak", after the vape itself. Green is the usual starting point.

Lower settings preserve delicate terpenes and suit high-quality extracts. The top setting at 310 °C extracts more of the load within a single cycle. Even with water in the glass, the vapour can feel harsh at the back of the throat.

A double-click starts the heat cycle. Once the Peak is at temperature, double-click again to start Boost Mode, which adds about 15 seconds and roughly 10 °C. Five clicks starts Intensity Mode, a stronger cycle designed for dry dabs with no water in the glass.

There is no app and no Bluetooth pairing. The four presets cannot be edited, and every function sits on the single button. That makes the Peak easy to pass around at a gathering.

The chamber is sized for small to medium dabs. You place concentrate on the bottom surface with the included metal loading tool, then refit the joystick cap. Small loads still give a full session.

The chamber unscrews from the base by hand for cleaning or replacement. The threading is specific to the Peak, so chambers from other Puffco models do not fit.

Ceramic wears out over repeated heat cycles, so a spare 3D Chamber (sold separately) is worth having. You can also add the Hot Knife, a heated loading tool that lets sticky extracts slide off the tip.

You control the whole session with the one button on the front and the joystick cap on top.

1. Filling: Pull the glass gently off the base. Fill it through the mouthpiece to just above the percolation slits, then press it back into place.
2. Loading: Lift off the joystick cap. Place your concentrate on the bottom surface of the chamber with the loading tool, then refit the cap.
3. Powering on: Press and hold the button for three seconds. A short vibration confirms it is on.
4. Choosing a temperature: Single-click to move through Blue, Green, Red and White.
5. Heating: Double-click to start. The light pulses, and about 25 seconds later the Peak flashes and vibrates twice.
6. Inhaling: Draw slowly and gently while swivelling the joystick cap to steer air around the edges of the chamber. Strong inhales can splash concentrate.
7. Boosting: Once it reaches temperature, double-click again to add roughly 15 seconds and about 10 °C.
8. Finishing: The heat cycle ends on its own after about 45 seconds. Hold the button for three seconds to switch off. Swab the warm chamber, then empty the water from the glass.

A sealed 1700 mAh battery gives roughly 30 to 35 dabs per charge. That covers a weekend of relaxed use. A triple-click shows the level on the LED band: green for full, orange for half, red for low. The band turns red with about five dabs left.

Charging runs through the USB-C port on the back of the base and takes about two hours. A USB-C to USB-C cable comes in the box, and it is longer than the cables usually supplied. The battery is not user-replaceable, and the Peak does not support wireless charging.

The kit does not include a wall adapter. The USB-C Fast Charger (45W), sold separately, fills that gap at home or in a hotel room.

Most days, a wipe of the warm chamber with a cotton swab after each session is all it takes. Gentle circular swipes are enough. Use light pressure when swabbing so you do not damage the chamber's heating elements.

For a deeper clean, soak the glass in 90% isopropyl alcohol for 20 minutes. Rinse it with water and let it air-dry completely before you refit it to the base.

Give the chamber the same 20-minute soak in 90% isopropyl alcohol, then let it air-dry fully. Never rinse the chamber with water. For the base, use a swab dampened with isopropyl on the thread block and air path. Keep water away from the base entirely.

Empty the glass after every session and never store the Peak with water in it. The small air holes in the glass collect residue (reclaim) over time, and regular rinsing keeps them clear.

The Peak Pro 3DXL is Puffco's flagship eRig and costs roughly twice as much. Its Bluetooth app unlocks custom temperatures from 232 °C to 316 °C, custom session lengths and firmware updates. The oversized 3DXL chamber takes much larger loads. The Peak Pro 3DXL also supports wireless charging and comes with a carry case.

The Peak gives you the same 360° ceramic heating at about half the price. It is smaller and lighter, roughly 10% shorter in both base and glass. The joystick also sits within easy reach of one finger. Its two horizontal percolation slits give a more open draw than the Pro's five vertical slits.

If you load large dabs or want to set an exact temperature, the Pro 3DXL is worth what it costs. For everyday dabs with no settings to adjust, the Peak does the same job with fewer steps.

The Proxy is Puffco's modular concentrate vaporizer: a heated core with its own 3D chamber that drops into interchangeable glass bodies. It slips into a pocket far more easily than any eRig, and the glass options are extensive. The current version adds a Bluetooth app.

The Peak arrives as a complete water-cooled rig out of the box, with fitted borosilicate glass and nothing to pair or update. The base is heavier and stands on its own. The joystick cap stays attached to its tether. The two chambers hold about the same amount.

If you want to carry it in a jacket, choose the Proxy. If you prefer to sit down at home for water-filtered dabs, choose the Peak.

Right now we offer a 25% discount on all accessories when you buy any vaporizer at MagicVaporizers. Below is a guide to what is worth adding to a Peak order.

USB-C Fast Charger (45W): The kit ships with a cable but no plug. This is the mains adapter that completes the setup at home or in a hotel.

Puffco - New Hot Knife: Rosin and live resin cling stubbornly to a cold tool. The heated ceramic tip lets sticky extracts slide straight into the chamber.

Puffco Peak Pro - Travel Glass: Shorter than the standard glass, so there is far less risk of breakage when you pack the Peak for a trip.

Puffco Peak - 3D Chamber: The chamber is the Peak's one consumable. A spare lets you carry on dabbing while the first soaks and air-dries. It fits the Peak only.

Puffco Peak - Glass 2.0: Exact-fit replacement glass for the Peak, matching the fill line, percolation slits and wide mouthpiece of the original.

Puffco Peak Pro - Glass 2.0: Sized for the Peak Pro but compatible with the shared Peak joint, so you get the taller Pro-style water chamber.

Puffco covers the Peak with a two-year warranty on the electronic base and battery, a year longer than most comparable devices offer. The glass and the 3D Chamber are wear parts and are not covered. Every Peak we sell is an authentic Puffco product, designed in Los Angeles.