This website is wholesale only, you can't see prices or buy products if you're not logged in.
SKU
ignore-this-84
 
  20 or more in stock
 
  Out of stock
79 €
  20 or more in stock
Ispire - The Wand Induction Heater
Ispire - The Wand (Induction Heater)
79 €

Features

  • Induction heating
  • Great at heating DynaVap vaporizers
  • Full temperature control (120°C to 425°C)
  • Borosilicate glass cups
  • Removable batteries (2 × 2900 mAh)
  • Safety features

The Wand by Ispire is a portable induction heater for use with concentrates, and in addition to that, it’s also great at heating the tips of DynaVap vaporizers.

What is induction heat?

Induction heat is a highly accurate, controllable, and more predictable heat source than the torches used normally used for this kind of vaping, so you’re going to experience consistency and less waste by eliminating over- or under-heating. Select any temperature you want in 5-degree increments, from 120°C to 425°C. 

Wand Glass Adapter for DynaVap vaporizers

If you plan on using the Wand with a DynaVap vaporizer, we recommend getting the Wand Glass Adapter so you can lodge the tip instead of having to swirl it around for even heat. With it, you no longer need to keep an eye on it and can use it hands-free. Just sit back and wait for the “click” of the Captive Cap.

Automatic and manual mode

You can use it in one of two modes, either manual mode or automatic mode. To use it in manual mode, hold the large button down until the cup or your DynaVap reaches your set temperature.

When you first hold the button down the Wand will blink with a red light, then once you put over something metal it will engage the induction heating and pulse a white light while it’s heating up. When it arrives at your set temperature the white light will stay on, meaning you can go ahead and enjoy whatever you're heating.

To use it in automatic mode, double press the large button, and then place it on the induction cup or put your DynaVap in it. One great thing about the automatic mode is that you can take it off and on throughout the cycle and it will just re-engage the heating, so you can sort of feather the heat while in use.

Removable batteries

The Wand is powered by two replaceable 2900 mAh batteries that can be charged with the included USB-C cable, or externally if you have a charger for 18650 batteries.

Includes

  • The Wand induction heater
  • Angled banger
  • Straight banger
  • Carb cap
  • Inner cup (2)
  • USB-C charger cable
  • Instruction manual
18 €
  20 or more in stock
The Wand - DynaVap Glass Adapter
The Wand - DynaVap Glass Adapter
18 €

This Glass Adapter is an accessory to The Wand induction heater that makes it easier to use it with DynaVap vaporizers. With it inserted, you can easily let the Captive Cap rest in it and just wait for it to heat up. No more swirling or looking for the right angle, just put the vape in and you are ready to get going in seconds.

Includes:

  • Silicone sleeve
  • Glass cup
95 €
  Less than 20 in stock
The DynaTec Apollo 2 Induction Heater from DynaVap is perfect to heat your VapCap with at home.
DynaVap - DynaTec Apollo 2 Induction Heater
95 €

DynaVap has revolutionized the VapCap heating with the new DynaTec Apollo 2 Induction Heater! Using an induction heater is a completely different way to heat your DynaVap VapCap as it doesn't heat your material with a flame, instead, it uses a protected coil to heat around the cap. The DynaTec Apollo 2 will work with both a stainless steel and a titanium tip and will reach temperature in only 5 to 8 seconds.

A switch is built into the chamber so that the heater will only activate when a DynaVap VapCap is inserted, indicated by a red light, and on top there is also a magnet to cool your cap more quickly after use which helps you to save more material.

Compared to using a torch, it heats to a lower temperature, so it’s perfect for flavour chasers and those who prefer cooler temperatures. For hotter draws, leave the vape in for an extra second or two after the click.

An auto-shutoff feature limits heating to a maximum of 15 seconds at a time to keep things safe. DynaVap provides a 12-month warranty period in case you experience any problems.

The DynaTec Apollo 2 Induction Heater will make your DynaVap VapCap easier to use, more convenient, and with better flavour - what more can you ask for?

Includes:

  • DynaVap DynaTec Apollo 2 Induction Heater
  • Power supply
  • Two-prong EU-plug
  • Instruction manual

Intended for use with: DynaVap M DynaVap Omni and DynaVap VonG (i): Titanium.

139 €
  Out of stock
Enjoy portable induction heating with the DynaTec Orion Induction Heater especially made for DynaVap vapes.
DynaVap - DynaTec Orion V2 Induction Heater
139 €

The DynaVap DynaTec Orion Induction Heater is an extremely lightweight, portable, heating system made especially for DynaVap vapes. Enjoy flavourful and consistent vapour with your DynaVap VapCap wherever you go! The battery has a capacity of 1000 mAh which is enough for 50 heat-ups on average and it works with both titanium and stainless steel tips.

You don't have to worry about pushing any buttons as the Orion Induction Heater senses when the VapCap is inserted. To operate just insert the DynaVap VapCap into the chamber until you see the orange light blinking and listen for the click to indicate that it's heated (or count the blinks). In just four to six seconds your material will be heated to perfection and you'll be ready for luxurious, tasty vapour. An automatic shut-off feature limits heating to a maximum of 10 seconds at a time.

The included zippered case also fits not only your Orion but also the USB-C charging cable, the included SnapStash, and has room to safely store your VapCaps.

The DynaTec Orion Induction Heater is designed and assembled in the USA and comes with a 1-year warranty.

Includes:

  • DynaVap DynaTec Orion Induction Heater
  • DynaVap DynaTec Zipper Case
  • USB-C charging cable
  • SnapStash (small)
  • Instruction manual

Intended for use with: DynaVap M DynaVap Omni and DynaVap VonG (i): Titanium.

26 €
  20 or more in stock
Duality Torch - Open
Duality Torch
26 €

The Duality is a high-quality butane torch lighter. It has a pocket-proof ignition and a single or double flame to choose from depending on your preference. It also features a large tank window that allows you to keep an eye on the fuel level, as well as making it easy to refill it without issue. The flame can be adjusted with the dial at the bottom and the flint ignition can be replaced if it gets worn out.

It ships empty so you need to add butane gas to it before you can use it.

Intended for use with: DynaVap M DynaVap Omni and DynaVap VonG (i): Titanium.

9 €
  20 or more in stock
Cyclone Triple Torch
Cyclone Triple Torch
9 €

The Vertigo Cyclone Triple Torch is one of the most budget friendly torch lighters you will ever find. It features a large, clear fuel tank so you’ll always know how much fuel remains and it also makes refilling it a lot easier. The wind resistant flame is capable of lighting at 3'500 meters above sea level.

Fill it with filtered butane gas, available at hobby stores and Amazon, before use (not included). We recommend using the brand Colibri but any butane gas that has been filtered at least five times should work well. 

Please note that regular lighter gas (propane), is not compatible with torches. Torches need filtered butane gas to deliver their high performance.

Do not clean the Cyclone Triple Torch with alcohol as this will degrade the plastic, resulting in fuel leaks.

23 €
  20 or more in stock
The Deluxe DynaKit for DynaVap vaporizers has everything you need to keep your vape in the best condition.
DynaVap - DynaKit: Deluxe
23 €

The DynaKit: Deluxe by DynaVap is full of spare parts and cleaning products you can use to keep your DynaVap vape in top condition. Cleaning your vape is very rewarding and it also helps to keep the taste of your VapCap vapour optimal.

Included in this kit is the Cyclone Triple Torch, a wind-resistant torch lighter perfect for heating your DynaVap vape, a fat mouthpiece, three titanium diffusers to filter the air, the DynaMag to provide touch-free handling of a hot cap, a small SnapStash to store herbs in and two storage tubes to transport your vape in.

To maintain your DynaVap vape this kit includes the DynaWax, five cotton pipe cleaners and two different sets of O-rings.

Includes:

  • Cyclone Triple Torch (empty) (1)
  • Fat mouthpiece (1)
  • Titanium CCD (3)
  • DynaMag (1)
  • SnapStash (small) (1)
  • Storage tubes (2)
  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-Temp O-rings (5)

The DynaKit: Deluxe is compatible with the following DynaVap vaporizers:

13 €
  20 or more in stock
Keep your DynaVap in great condition with the help of the Maintenance DynaKit.
DynaVap - DynaKit: Maintenance
13 €

The DynaKit: Maintenance helps you clean your DynaVap vape quickly and efficiently. The included DynaWax should be used to keep the O-rings well lubricated.

Since O-rings are small and easy to lose, this kit includes eight additional ones. There are two different types of O-rings that come with the DynaKit Maintenance; condenser O-rings and high-temperature O-rings.

Includes:

  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-temperature O-rings (5)
The kit is compatible with the following DynaVap models:

17 €
  20 or more in stock
With the DynaCoil you can vaporize concentrates with your DynaVap vape.
DynaVap - DynaCoil
17 €

The DynaVap DynaCoil is designed to fit inside the Cap of your DynaVap vape letting you use it with your favourite concentrates or other sticky substances. To use it, all you need to do is to remove the herb screen from your cap, insert the DynaCoil, place your concentrate directly on the coil, heat, and enjoy.

Note that the DynaCoil arrives rolled up and shouldn't be unrolled for any reason.

Intended for use with: DynaVap M DynaVap Omni and DynaVap VonG (i): Titanium.

2 €
  20 or more in stock
Use the Fat Mouthpiece if you want to connect your DynaVap vape to a water pipe (14 mm).
DynaVap - Fat Mouthpiece
2 €

The DynaVap Fat Mouthpiece will fit onto the end part of all DynaVap models. It can be used as an extra mouthpiece for sharing among friends or it can be used as a water pipe adapter, fitting all female 14 mm connections which enables you to easily turn your DynaVap vape into a water-cooled vaporizer.

Please note - the Fat Mouthpiece will not fit into the opening of the DynaStash, you must remove it before placing your DynaVap into the DynaStash.

Intended for use with: DynaVap M DynaVap Omni and DynaVap VonG (i): Titanium.

5 €
  20 or more in stock
The DynaVap Stainless Steel Screens keeps your vapour pure and tasty.
DynaVap - Stainless Steel Screens (3-pack)
5 €

The Stainless Steel Screens go in between the chamber and the tip of the VapCap to keep the vapour pure and free from fine particles from your herbs. These screens are compatible with both the titanium and stainless steel tips.

Includes:

  • Stainless steel screens (3)

Intended for use with: DynaVap M DynaVap Omni and DynaVap VonG (i): Titanium.

15 €
  20 or more in stock
The DynaVap Low Temp. Captive Cap has a unique logo on it to differentiate it from the normal Captive Cap.
DynaVap - Low Temp. Captive Cap
15 €

The DynaVap Low Temp. Captive Cap provides a whole new experience with your DynaVap VapCap vape. By clicking earlier in the heating cycle, it helps you be more consistent with your heating times, enabling you to vape your herbs with less risk of combustion and enjoy a more complex flavour profile. The Low Temp. Captive Cap also comes with a unique logo on it to differentiate it from your standard Captive Cap.

The DynaVap Low Temp. Captive Cap was designed for the DynaVap VapCap M but will fit any VapCap. If you’re looking for cooler vapour, or want to experience more flavour from your herbs this is a great accessory to have.

Intended for use with: DynaVap M DynaVap Omni and DynaVap VonG (i): Titanium.

15 €
  20 or more in stock
The DynaVap Captive Cap helps distribute the airflow better.
DynaVap - Captive Cap
15 €

The new DynaVap Captive Cap helps keep the cap in place while also allowing for a more even distribution of the airflow. If you’ve ever had the cap get dislodged off of your DynaVap during a heat up, you’ll really appreciate the new design of this cap. The “click” you hear when the vape has heated up, or cooled down is also more distinct and easier to hear.

The DynaVap Captive Cap was designed for the DynaVap VapCap M but will fit any VapCap. If you’re looking for a replacement cap or just want something new, the Captive Cap is a great option.

Intended for use with: DynaVap M DynaVap Omni and DynaVap VonG (i): Titanium.

Features

  • Newest version! (2022.10)
  • Titanium construction for ultimate durability
  • Fully adjustable airflow
  • Ultra-compact design
  • Can reach vaping temp in seconds
  • Manual heating - no batteries and no charging
  • Audible temperature notification (click sound)
  • Made in the USA

Who is the VapCap Omni for?

The Omni is the top-of-the-line vape manufactured by DynaVap and comes with many smart features that both make it easy to use, but also allows for a lot of customisability. Even though it’s ultra-compact, it still has a fully adjustable airflow, adjustable bowl size and a cap that audibly “clicks” when it has reached the temperature necessary for vaping.

It’s perfect for those looking for a reliable and near-indestructible vaporizer that’s extremely convenient to bring. As it’s heated manually you never have to worry about batteries or charging. Simply bring a lighter with you and you are ready to use the Omni whenever - and wherever - you want.

What’s the difference between “M” and Omni?

Even though both the M and the Omni produce flavourful vapour, there are two big differences between them; the construction material and the ability to adjust the airflow.

On the Omni, the body, tip and mouthpiece are made of the nearly indestructible material titanium while the heating cap is made from stainless steel. On the M, everything is made of stainless steel. The titanium makes the Omni 60% lighter and more durable.

If you like to experiment with draw resistance, you will appreciate that the Omni comes with the ability to adjust the airflow. Increase the airflow to get a lot of vapour quickly, for those times you’re in a hurry, or decrease it for those slower, relaxing sessions.

Great for microdosing

The adjustable titanium bowl of the Omni holds between 0,025 and 0,1 grams of dry herb. You don’t need much herbs at all to feel the effects as the heating process is surprisingly effective. Thanks to the simplicity and ingenuity of the design it’s also easy to reload if you decide you need some more.

Manual heating

Heating up the VapCap Omni is easy, all you have to do is either hold the cap over a flame from a lighter or insert it into an induction heating device. Once you hear the “click” it has reached the temperature for vaping (150 to 230°C). The temperature is adjustable by which section of the cap you decide to heat. After around 30 seconds, you will hear a second “click” which is Omni’s way of letting you know it’s time to heat it again.

Quick and efficient

The heating process takes less than 10 seconds from start, and even quicker between loads which means you never have to wait long to get started with a session. If you get distracted while vaping, don’t worry, the Omni only heats your herbs when you are drawing in the vapour.

Customisable vapour

Get the exact vapour you want in every draw thanks to Omni’s manual heating and adjustable airflow, visualized by the dial-indicator. Depending on where you heat the cap and how much airflow you choose, you can get light, flavourful hits or thick satisfying heavy clouds.

Ultra-compact

As the Omni is free from batteries and electronics its size is extremely impressive. Measuring 109 mm in length and 45 mm in width with a weight of just 20 grams it’s smaller than the average pen and is guaranteed to fit in even the smallest pockets.

Warranty

All DynaVap Omni vaporizers sold by MagicVaporizers, an authorized distributor of DynaVap products, are authentic and backed by a 2-year warranty, restricted to normal use.

DynaVap Omni

In the Box

  • DynaVap Omni vaporizer
  • Recyclable packaging
DynaVap Omni

Specifications

More Information
Size: 10,9 × 4,5 cm
Weight: 20 g
Heating: Hybrid (Convection+Conduction)
Heat-up time: Less than 10 seconds
Power source: Torch or Induction
Temperature: 150°C to 230°C
Manufacturer: DynaVap
Warranty: 2 years
Country of manufacture: United States