SKU
ignore-this-126
 
  20 or more in stock
 
  20 or more in stock
  20 or more in stock
DynaVap - DynaKit: Deluxe
23 €

The DynaKit: Deluxe by DynaVap is full of spare parts and cleaning products you can use to keep your DynaVap vape in top condition. Cleaning your vape is very rewarding and it also helps to keep the taste of your VapCap vapour optimal.

Included in this kit is the Honest Torch, a wind-resistant torch lighter perfect for heating your DynaVap vape, a fat mouthpiece, three titanium diffusers to filter the air, the DynaMag to provide touch-free handling of a hot cap, a small SnapStash to store herbs in and two storage tubes to transport your vape in.

To maintain your DynaVap vape this kit includes the DynaWax, five cotton pipe cleaners and two different sets of O-rings.

Includes:

  • Honest Torch (empty) (1)
  • Fat mouthpiece (1)
  • Titanium CCD (3)
  • DynaMag (1)
  • SnapStash (small) (1)
  • Storage tubes (2)
  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-Temp O-rings (5)

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Armored Cap
24 €

Upgrade your DynaVap vaporizer with the Armored Cap and take your vaping experience to the next level.

The Armored Cap features a Captive Cap encased in a stainless steel shell designed to provide more thermal mass, so you can enjoy longer heat cycles and require fewer cycles to fully vaporize your material. Plus, you won't need to spin the unit while heating to ensure even and full vaporization of your herbs.

To be compatible with most DynaVap models, the Armored Cap retains the classic look and design of the Captive Cap, including the built-in digger tool. It has a sleek matte grey finish that will develop a beautiful patina over time. You can easily aim your flame at the mini logo for consistent and satisfying vapour every time.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
Ispire - The Wand (Induction Heater)
79 €

Features

  • Induction heating
  • Great at heating DynaVap vaporizers
  • Full temperature control (120°C to 425°C)
  • Borosilicate glass cups
  • Removable batteries (2 × 2900 mAh)
  • Safety features

The Wand by Ispire is a portable induction heater for use with concentrates, and in addition to that, it’s also great at heating the tips of DynaVap vaporizers.

What is induction heat?

Induction heat is a highly accurate, controllable, and more predictable heat source than the torches used normally used for this kind of vaping, so you’re going to experience consistency and less waste by eliminating over- or under-heating. Select any temperature you want in 5-degree increments, from 120°C to 425°C. 

Automatic and manual mode

You can use it in one of two modes, either manual mode or automatic mode. To use it in manual mode, hold the large button down until the cup or your DynaVap reaches your set temperature.

When you first hold the button down the Wand will blink with a red light, then once you put over something metal it will engage the induction heating and pulse a white light while it’s heating up. When it arrives at your set temperature the white light will stay on, meaning you can go ahead and enjoy whatever you're heating.

To use it in automatic mode, double press the large button, and then place it on the induction cup or put your DynaVap in it. One great thing about the automatic mode is that you can take it off and on throughout the cycle and it will just re-engage the heating, so you can sort of feather the heat while in use.

Removable batteries

The Wand is powered by two replaceable 2900 mAh batteries that can be charged with the included USB-C cable, or externally if you have a charger for 18650 batteries.

Includes

  • The Wand induction heater
  • DynaVap Wand Adaptor
  • Angled banger
  • Straight banger
  • Carb cap
  • Inner cup (2)
  • USB-C charger cable
  • Instruction manual
  Out of stock
The Wand - DynaVap Glass Adapter
18 €

This Glass Adapter is an accessory to The Wand induction heater that makes it easier to use it with DynaVap vaporizers. With it inserted, you can easily let the Captive Cap rest in it and just wait for it to heat up. No more swirling or looking for the right angle, just put the vape in and you are ready to get going in seconds.

Includes:

  • Silicone sleeve
  • Glass cup
  20 or more in stock
DynaVap - Bonger
9 €
 

The Bonger is the official DynaVap water pipe adapter made specifically for use with any DynaVap tip and Caps combination. Constructed from durable silicone, it easily connects your vaporizer to 10 mm or 14 mm male water pipe joints for enhanced, water-filtered vapour. 

The included stainless steel condenser tube provides a pure air path while cooling the vapour for smooth inhalation. Experience richer flavour profiles and ultra-smooth draws when you connect your DynaVap to water filtration with the Bonger!

How to use the Bonger

  • Insert DynaVap tip and the Cap into included condenser tube
  • Attach Bonger end to 10 mm or 14 mm male water tool
  • Inhale slowly and enjoy the cool, smooth vapour through the water pipe

Includes

  • Bonger adapter
  • Stainless steel condenser tube

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Honest Torch
5 €

The Honest Torch is the perfect lighter for precisely heating your DynaVap vaporizer. This refillable butane torch lighter has a single flame design that allows for targeted, controlled heating of the DynaVap tip.

With an easy-to-use ignition button and adjustable flame size, you can customise the intensity of your DynaVap sessions for your preferred vaporization experience. The ergonomic shape offers a comfortable non-slip grip during heating sessions.

A fuel window lets you monitor butane levels at a glance. The included cap attaches securely to the torch body with a chain when not in use so you can take your Honest Torch anywhere without worrying about it getting lost.

The Honest Torch ships without fuel, so butane will need to be added prior to first use. Be sure to use filtered butane specifically made for torches, as regular lighter gas (propane) is not compatible and may damage the torch.

Once filled with quality butane, the Honest Torch delivers reliable high performance to precisely heat your DynaVap for unforgettable vape sessions.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
Duality Torch
26 €

The Duality is a high-quality butane torch lighter. It has a pocket-proof ignition and a single or double flame to choose from depending on your preference. It also features a large tank window that allows you to keep an eye on the fuel level, as well as making it easy to refill it without issue. The flame can be adjusted with the dial at the bottom and the flint ignition can be replaced if it gets worn out.

It ships empty so you need to add butane gas to it before you can use it.

Please note that regular lighter gas (propane), is not compatible with torches. Torches need filtered butane gas to deliver their high performance.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  Less than 20 in stock
Cyclone Triple Torch
9 €

The Vertigo Cyclone Triple Torch is one of the most budget friendly torch lighters you will ever find. It features a large, clear fuel tank so you’ll always know how much fuel remains and it also makes refilling it a lot easier. The wind resistant flame is capable of lighting at 3'500 meters above sea level.

Fill it with filtered butane gas, available at hobby stores and Amazon, before use (not included). We recommend using the brand Colibri but any butane gas that has been filtered at least five times should work well. 

Please note that regular lighter gas (propane), is not compatible with torches. Torches need filtered butane gas to deliver their high performance.

Do not clean the Cyclone Triple Torch with alcohol as this will degrade the plastic, resulting in fuel leaks.

  20 or more in stock
DynaVap - DynaStash (Walnut)
32 €

The DynaStash is the perfect complement to a DynaVap vape. It has a large compartment to hold a generous amount of herbs which makes it super easy to load your DynaVap. All you have to do is press your DynaVap into the material, twist, and then you are ready to start vaping!

It also features another compartment to store your DynaVap, so you have everything you need (except the heat source) in one place. On top of the DynaStash is a strong magnet that can be used to store your DynaVap when not in use, as well as to help cool it down between hits.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - DynaKit: Maintenance
13 €

The DynaKit: Maintenance helps you clean your DynaVap vape quickly and efficiently. The included DynaWax should be used to keep the O-rings well lubricated.

Since O-rings are small and easy to lose, this kit includes eight additional ones. There are two different types of O-rings that come with the DynaKit Maintenance; condenser O-rings and high-temperature O-rings.

Includes:

  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-temperature O-rings (5)

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - DynaCoil
17 €

The DynaVap DynaCoil is designed to fit inside the Cap of your DynaVap vape letting you use it with your favourite concentrates or other sticky substances. To use it, all you need to do is to remove the herb screen from your cap, insert the DynaCoil, place your concentrate directly on the coil, heat, and enjoy.

Note that the DynaCoil arrives rolled up and shouldn't be unrolled for any reason.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - DynaStash (Wenge)
32 €

The DynaStash is the perfect complement to a DynaVap vape. It has a large compartment to hold a generous amount of herbs which makes it super easy to load your DynaVap. All you have to do is press your DynaVap into the material, twist, and then you are ready to start vaping!

It also features another compartment to store your DynaVap, so you have everything you need (except the heat source) in one place. On top of the DynaStash is a strong magnet that can be used to store your DynaVap when not in use, as well as to help cool it down between hits.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Fat Mouthpiece
2 €

The DynaVap Fat Mouthpiece will fit onto the end part of all DynaVap models. It can be used as an extra mouthpiece for sharing among friends or it can be used as a water pipe adapter, fitting all female 14 mm connections which enables you to easily turn your DynaVap vape into a water-cooled vaporizer.

Please note - the Fat Mouthpiece will not fit into the opening of the DynaStash, you must remove it before placing your DynaVap into the DynaStash.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Stainless Steel Screens (3-pack)
5 €

The Stainless Steel Screens go in between the chamber and the tip of the VapCap to keep the vapour pure and free from fine particles from your herbs. These screens are compatible with both the titanium and stainless steel tips.

Includes:

  • Stainless steel screens (3)

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Low Temp. Captive Cap
15 €

The DynaVap Low Temp. Captive Cap provides a whole new experience with your DynaVap VapCap vape. By clicking earlier in the heating cycle, it helps you be more consistent with your heating times, enabling you to vape your herbs with less risk of combustion and enjoy a more complex flavour profile. The Low Temp. Captive Cap also comes with a unique logo on it to differentiate it from your standard Captive Cap.

The DynaVap Low Temp. Captive Cap was designed for the DynaVap VapCap M but will fit any VapCap. If you’re looking for cooler vapour, or want to experience more flavour from your herbs this is a great accessory to have.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Captive Cap
15 €

The new DynaVap Captive Cap helps keep the cap in place while also allowing for a more even distribution of the airflow. If you’ve ever had the cap get dislodged off of your DynaVap during a heat up, you’ll really appreciate the new design of this cap. The “click” you hear when the vape has heated up, or cooled down is also more distinct and easier to hear.

The DynaVap Captive Cap was designed for the DynaVap VapCap M but will fit any VapCap. If you’re looking for a replacement cap or just want something new, the Captive Cap is a great option.

Intended for use with: DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Condenser with M7 Mouthpiece
22 €

Upgrade your DynaVap by adding the Condenser with M7 Mouthpiece, a versatile accessory that enables adjustable airflow and extends the length of the vape, creating an XL length vaporizer.

Both components are made from high-quality, medical-grade stainless steel and seamlessly clicks into each other. They fit a wide range of DynaVap vaporizers such as:

Tailor your vaping session to your preferences by selecting from six different airflow settings, easily adjustable by changing the condenser depth within the mouthpiece.

The M7 mouthpiece features an ergonomic design with oval-shaped flat spots, providing a comfortable and enjoyable vaping experience.

The Condenser with M7 Mouthpiece is particularly beneficial for users with larger hands, as it extends the length of the vaporizer, making it easier to hold and control. This added length also provides a cooler vapour experience, as the vapour has more time to cool down before reaching your mouth.

Includes:

  • Condenser
  • M7 mouthpiece
  • O-rings (2)
  Out of stock
MV StashBox + 8 Accessories
26 €

The MV StashBox is perfect for storing your portable vaporizer and accessories. It comes equipped with a combination lock to keep your items secure and a durable handle for easy transportation. The bag has a durable zip and removable Velcro dividers to help you organise your accessories according to your preferences.

Included with the MV StashBox are a 4-piece aluminium grinder, a tray, a glass container, a tube case, and three smell-proof plastic bags. These things fit perfectly inside the bag, and the tray can be stored in the durable mesh pocket up top.

Whether you're using it for storage at home or to bring things with you, your gear will always be safe, organised, and within reach.

Included:

  • Zip bag with combination lock (22 × 14 × 9 cm)
  • 4-piece grinder (aluminium)
  • Tray (18 × 15 cm)
  • Glass container
  • Tube case
  • Smell-proof zip bags (3)
  • Storage bag

DynaVap M7 Features

  • Newest version (2024.05)
  • Manual heating for complete control
  • Finless tip for deeper, more even extraction
  • Textured stem for enhanced grip
  • Redesigned air port and rocker
  • "Adjust-a-bowl" for microdosing
  • XL version with adjustable airflow
  • "Captive Cap" clicks at ideal temperature
  • Made from medical grade stainless steel in the USA

Who is the DynaVap M7 for?

The DynaVap M7 is an excellent choice for anyone seeking a high-quality manual dry herb vaporizer. It caters to both new and experienced users alike.

The M7's intuitive design allows beginners to achieve great results with ease. Meanwhile, advanced users will appreciate the adjustable features that enable them to fine-tune their vaping sessions.

With its compact size and manual heating, the M7 is perfect for discreet vaping on the go. The microdosing capability also makes it ideal for users who prefer smaller, more controlled doses throughout the day.

The M vaporizer reimagined

The DynaVap M7 is a reimagining of the classic "M" vaporizer. It retains the best features of its predecessor while introducing new enhancements to elevate your vaping experience.

The M7's updated design includes a finless tip that provides more even heat distribution and improved airflow. This results in deeper, more consistent extraction of your herbs.

The new textured stem not only adds a touch of style but also offers better grip and heat dissipation. The stem combined with the redesigned air port, the M7 delivers more comfortable and flavourful vaping sessions.

DynaVap M7 vs DynaVap M7 XL

The DynaVap M7 and M7 XL share many of the same features, but the XL version offers some additional benefits for those who prefer a more customisable vaping experience.

DynaVap M7 XL

  • All the features of the standard M7
  • Extended mouthpiece and condenser
  • Adjustable airflow with six settings
  • Cooler vapour due to the longer vapour path
  • Better suited for users with larger hands

Choose the DynaVap M7 if you prioritise portability and simplicity, or opt for the M7 XL if you want the added benefits of adjustable airflow and cooler vapour. Both devices deliver exceptional performance and flavour, making them excellent choices for any vaporizer enthusiast.

If you already own a DynaVap M7 and want to upgrade to the M7 XL, you can purchase the Condenser with Mouthpiece separately. This allows you to convert your standard M7 into an M7 XL, giving you access to the same features without having to buy a whole new device.

Manual heating for complete control

The DynaVap M7 utilises manual heating, giving you complete control over your vaping experience. You can use a torch lighter or an induction heater like the Ispire Wand to heat the cap to your desired temperature.

Heating the cap closer to the tip produces lighter, more flavourful hits, while heating closer to the base results in denser, more potent vapour. This level of control allows you to customise each session to your liking.

Manual heating makes the M7 incredibly versatile. You can use it anywhere, anytime, without worrying about batteries or charging. This freedom is perfect for those who enjoy vaping on the go or during outdoor adventures.

Elevate your DynaVap experience with the Ispire Wand

The Ispire Wand is a portable induction heater that offers precise temperature control and consistent heating for your DynaVap M7. With accurate, controllable, and predictable heat, you can personalise your sessions by selecting temperatures from 120°C to 425°C in 5-degree increments.

Choose between manual and automatic modes to suit your vaping style, and enjoy the convenience of USB-C charging or the option to use an external charger for the removable 2900 mAh batteries.

Updated finless tip for deeper extraction

DynaVap has introduced a finless tip design in the M7 model, which results in more even heat distribution and enhanced airflow.

The finless design results in a more consistent extraction of your herbs, ensuring that you get the most out of every bowl. The increased surface area of the tip also contributes to better heat retention, leading to deeper and more satisfying hits.

In addition to improved performance, the finless tip design reduces heat transfer to the stem, which means its more comfortable to hold, even after a long session.

Adjustable airflow (M7 XL version)

The M7 XL takes your DynaVap experience to the next level with its adjustable airflow feature. The XL version comes with an extended mouthpiece and condenser that allows you to fine-tune the airflow to your liking.

The mouthpiece and condenser assembly features six distinct settings, letting you choose between a tighter draw for more concentrated flavour or a looser draw for increased vapour production. Adjust the airflow by simply twisting the mouthpiece to your preferred setting.

This new airflow feature makes the M7 XL adaptable to your personal vaping style and preferences. Whether you prioritise flavour or cloud production, the adjustable airflow ensures that you can tailor your vaping sessions.

Redesigned aesthetics and texture

With a sleek and modern redesign, the DynaVap M7 not only looks great but also enhances functionality. The stem features a new texture that provides a better grip, ensuring a comfortable and secure hold during use.

Airflow has also been improved, as both the air port and the rocker (the tactile feature that helps you manually control airflow) have been redesigned to provide more precise control over drag.

Crafted from high-quality, medical-grade stainless steel, the M7's durable construction is built to last. The combination of style and functionality makes the DynaVap M7 a vaporizer that you'll be proud to own and use for years to come.

Ready for microdosing

The DynaVap M7 is perfect for users who prefer smaller, more controlled doses throughout the day. Its "Adjust-a-bowl" feature allows you to easily reduce the bowl size by half (from 0.1 g to 0.05 g), making it ideal for microdosing.

To adjust the bowl size, simply remove the tip and reposition the screen to the halfway point. This reduces the chamber size, allowing you to pack smaller amounts of dry herb while still enjoying satisfying hits.

Microdosing with the M7 is an excellent way to maintain a consistent level of effects throughout the day without overconsuming. It's also a great option for those who are new to vaping or have a lower tolerance, as it allows for better control over the dosage.

How to use the DynaVap M7

Follow these simple steps to enjoy your DynaVap M7 vaporizer:

Preparation: Ensure your M7 is clean and ready for use. Finely grind your herbs for optimal vaporization.

Loading the chamber: Remove the cap from the tip and place your herbs in the chamber. Avoid over packing to ensure good airflow.

Add the cap: Place the cap back onto the tip, ensuring a secure fit.

Heating the cap: Use a torch or induction heater to heat the cap. Rotate the M7 while heating until you hear a click, which typically takes around 5-7 seconds.

Inhaling the vapour: Once the click is heard, place the mouthpiece to your lips and inhale slowly and steadily. The cap will click again when it has cooled down, indicating the end of the heat cycle.

Continuing or finishing the session: After the cooldown click, you can either reheat the cap for another round or save your AVB (Already Vaped Bud) for later use if your herb is spent.

Remember, the DynaVap M7 is a manual vaporizer, so you have full control over your vape sessions. Experiment with different heating techniques and draw speeds to find your perfect level.

Warranty

All DynaVap M7 vaporizers sold by MagicVaporizers, an authorised distributor of DynaVap products, are authentic and backed by a 2-year warranty, restricted to normal use.

DynaVap M7

In the Box

DynaVap M7
  • DynaVap M7 vaporizer
DynaVap M7 XL
  • DynaVap M7 vaporizer
  • Condenser with mouthpiece
DynaVap M7

Specifications

More Information
Size: 1.0 × 1.0 × 9.1 (10.8) cm
Weight: 21 (26) g
Heating: Hybrid (Convection+Conduction)
Heat-up time: 12 seconds
Power source: Torch or Induction
Temperature: 150°C to 230°C
Manufacturer: DynaVap
Warranty: 2 years
Country of manufacture: United States

Other vaporizers from DynaVap

  1. DynaVap M+ - Small
    Rating:
    88%
    DynaVap M+ (Plus)
    • Manually heated
    • Finless design for enhanced performance
    • Microdose-ready with adjustable bowl
  2. DynaVap Omni 2021 - Small
    Rating:
    90%
    (4)
    DynaVap Omni
    • Manually heated
    • Adjustable bowl and airflow
    • Made of titanium
  3. DynaVap VonG (i): Titanium - Small
    Rating:
    87%
    (3)
    DynaVap VonG (i): Titanium
    • Interchangeable parts
    • Great combined with water tools (10 & 14 mm)
    • Easy to keep clean