SKU
ignore-this-131
  Less than 20 in stock
  Out of stock
DynaVap - Hyper Dosing Capsules (5-pack)
13 €

DynaVap's Hyper Dosing Capsules are the perfect accessory for HyperDyn owners seeking convenience and consistency. These stainless steel capsules, designed specifically for the Hyper Tip, allow you to pre-pack your herbs for quick and easy vaping sessions on the go. With a capacity of approximately 0.12 grams per capsule, they ensure precise dosing and a reliable experience every time, perfect for microdosing.

The precision-engineered perforations in each capsule optimize airflow, ensuring efficient vaporization and smooth, flavorful draws without compromising performance.

Not only do these capsules make vaping more convenient, but they also contribute to easier maintenance of your HyperDyn. By containing your herbs within the capsule, they help keep your tip chamber cleaner, reducing the need for frequent deep cleaning.

How to use:

  1. Open the capsule and fill with your preferred herb
  2. Close the capsule securely
  3. Insert the filled capsule into your Hyper Tip
  4. Replace the cap and heat as usual
  5. Enjoy smooth and tasty vapor

Includes:

  • Hyper dosing capsules (5)

Intended for use with: DynaVap HyperDyn.

  20 or more in stock
DynaVap - DynaKit: Deluxe
23 €

The DynaKit: Deluxe by DynaVap is full of spare parts and cleaning products you can use to keep your DynaVap vape in top condition. Cleaning your vape is very rewarding and it also helps to keep the taste of your VapCap vapour optimal.

Included in this kit is the Honest Torch, a wind-resistant torch lighter perfect for heating your DynaVap vape, a fat mouthpiece, three titanium diffusers to filter the air, the DynaMag to provide touch-free handling of a hot cap, a small SnapStash to store herbs in and two storage tubes to transport your vape in.

To maintain your DynaVap vape this kit includes the DynaWax, five cotton pipe cleaners and two different sets of O-rings.

Includes:

  • Honest Torch (empty) (1)
  • Fat mouthpiece (1)
  • Titanium CCD (3)
  • DynaMag (1)
  • SnapStash (small) (1)
  • Storage tubes (2)
  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-Temp O-rings (5)

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
Ispire - The Wand (Induction Heater)
79 €

Features

  • Induction heating
  • Great at heating DynaVap vaporizers
  • Full temperature control (120°C to 425°C)
  • Borosilicate glass cups
  • Removable batteries (2 × 2900 mAh)
  • Safety features

The Wand by Ispire is a portable induction heater for use with concentrates, and in addition to that, it’s also great at heating the tips of DynaVap vaporizers.

What is induction heat?

Induction heat is a highly accurate, controllable, and more predictable heat source than the torches used normally used for this kind of vaping, so you’re going to experience consistency and less waste by eliminating over- or under-heating. Select any temperature you want in 5-degree increments, from 120°C to 425°C. 

Automatic and manual mode

You can use it in one of two modes, either manual mode or automatic mode. To use it in manual mode, hold the large button down until the cup or your DynaVap reaches your set temperature.

When you first hold the button down the Wand will blink with a red light, then once you put over something metal it will engage the induction heating and pulse a white light while it’s heating up. When it arrives at your set temperature the white light will stay on, meaning you can go ahead and enjoy whatever you're heating.

To use it in automatic mode, double press the large button, and then place it on the induction cup or put your DynaVap in it. One great thing about the automatic mode is that you can take it off and on throughout the cycle and it will just re-engage the heating, so you can sort of feather the heat while in use.

Removable batteries

The Wand is powered by two replaceable 2900 mAh batteries that can be charged with the included USB-C cable, or externally if you have a charger for 18650 batteries.

Includes

  • The Wand induction heater
  • DynaVap Wand Adaptor
  • Angled banger
  • Straight banger
  • Carb cap
  • Inner cup (2)
  • USB-C charger cable
  • Instruction manual
  20 or more in stock
DynaVap - Honest Torch
5 €

The Honest Torch is the perfect lighter for precisely heating your DynaVap vaporizer. This refillable butane torch lighter has a single flame design that allows for targeted, controlled heating of the DynaVap tip.

With an easy-to-use ignition button and adjustable flame size, you can customise the intensity of your DynaVap sessions for your preferred vaporization experience. The ergonomic shape offers a comfortable non-slip grip during heating sessions.

A fuel window lets you monitor butane levels at a glance. The included cap attaches securely to the torch body with a chain when not in use so you can take your Honest Torch anywhere without worrying about it getting lost.

The Honest Torch ships without fuel, so butane will need to be added prior to first use. Be sure to use filtered butane specifically made for torches, as regular lighter gas (propane) is not compatible and may damage the torch.

Once filled with quality butane, the Honest Torch delivers reliable high performance to precisely heat your DynaVap for unforgettable vape sessions.

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  Less than 20 in stock
Duality Torch - Black
26 €

The Duality is a high-quality butane torch lighter. It has a pocket-proof ignition and a single or double flame to choose from depending on your preference. It also features a large tank window that allows you to keep an eye on the fuel level, as well as making it easy to refill it without issue. The flame can be adjusted with the dial at the bottom and the flint ignition can be replaced if it gets worn out.

It ships empty so you need to add butane gas to it before you can use it.

Please note that regular lighter gas (propane), is not compatible with torches. Torches need filtered butane gas to deliver their high performance.

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  Out of stock
Cyclone Triple Torch
9 €

The Vertigo Cyclone Triple Torch is one of the most budget friendly torch lighters you will ever find. It features a large, clear fuel tank so you’ll always know how much fuel remains and it also makes refilling it a lot easier. The wind resistant flame is capable of lighting at 3'500 meters above sea level.

Fill it with filtered butane gas, available at hobby stores and Amazon, before use (not included). We recommend using the brand Colibri but any butane gas that has been filtered at least five times should work well. 

Please note that regular lighter gas (propane), is not compatible with torches. Torches need filtered butane gas to deliver their high performance.

Do not clean the Cyclone Triple Torch with alcohol as this will degrade the plastic, resulting in fuel leaks.

  20 or more in stock
DynaVap - DynaStash (Wenge)
32 €

The DynaStash is the perfect complement to a DynaVap vape. It has a large compartment to hold a generous amount of herbs which makes it super easy to load your DynaVap. All you have to do is press your DynaVap into the material, twist, and then you are ready to start vaping!

It also features another compartment to store your DynaVap, so you have everything you need (except the heat source) in one place. On top of the DynaStash is a strong magnet that can be used to store your DynaVap when not in use, as well as to help cool it down between hits.

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  Less than 20 in stock
DynaVap - DynaStash (Walnut)
32 €

The DynaStash is the perfect complement to a DynaVap vape. It has a large compartment to hold a generous amount of herbs which makes it super easy to load your DynaVap. All you have to do is press your DynaVap into the material, twist, and then you are ready to start vaping!

It also features another compartment to store your DynaVap, so you have everything you need (except the heat source) in one place. On top of the DynaStash is a strong magnet that can be used to store your DynaVap when not in use, as well as to help cool it down between hits.

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - SlimStash (African Mahogany)
9 €

Store your DynaVap vape in this sleek SlimStash made from African Mahogany wood. This Stash contains a compartment for your standard length (92 mm) device and is made from sustainably sourced wood.

Fits the Following DynaVap Items:

  • "M"
  • VonG
  • NonaVonG-S
  • BB3
  • Galaxy Glass Bodies
  20 or more in stock
DynaVap - DynaKit: Maintenance
13 €

The DynaKit: Maintenance helps you clean your DynaVap vape quickly and efficiently. The included DynaWax should be used to keep the O-rings well lubricated.

Since O-rings are small and easy to lose, this kit includes eight additional ones. There are two different types of O-rings that come with the DynaKit Maintenance; condenser O-rings and high-temperature O-rings.

Includes:

  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-temperature O-rings (5)

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Fat Mouthpiece
2 €

The DynaVap Fat Mouthpiece will fit onto the end part of all DynaVap models. It can be used as an extra mouthpiece for sharing among friends or it can be used as a water pipe adapter, fitting all female 14 mm connections which enables you to easily turn your DynaVap vape into a water-cooled vaporizer.

Please note - the Fat Mouthpiece will not fit into the opening of the DynaStash, you must remove it before placing your DynaVap into the DynaStash.

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Stainless Steel Screens (3-pack)
5 €

The Stainless Steel Screens go in between the chamber and the tip of the VapCap to keep the vapour pure and free from fine particles from your herbs. These screens are compatible with both the titanium and stainless steel tips.

Includes:

  • Stainless steel screens (3)

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  Out of stock
DynaVap - DynaCoil
17 €

The DynaVap DynaCoil is designed to fit inside the Cap of your DynaVap vape letting you use it with your favourite concentrates or other sticky substances. To use it, all you need to do is to remove the herb screen from your cap, insert the DynaCoil, place your concentrate directly on the coil, heat, and enjoy.

Note that the DynaCoil arrives rolled up and shouldn't be unrolled for any reason.

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Bonger
9 €
 

The Bonger is the official DynaVap water pipe adapter made specifically for use with any DynaVap tip and Caps combination. Constructed from durable silicone, it easily connects your vaporizer to 10 mm or 14 mm male water pipe joints for enhanced, water-filtered vapour. 

The included stainless steel condenser tube provides a pure air path while cooling the vapour for smooth inhalation. Experience richer flavour profiles and ultra-smooth draws when you connect your DynaVap to water filtration with the Bonger!

How to use the Bonger

  • Insert DynaVap tip and the Cap into included condenser tube
  • Attach Bonger end to 10 mm or 14 mm male water tool
  • Inhale slowly and enjoy the cool, smooth vapour through the water pipe

Includes

  • Bonger adapter
  • Stainless steel condenser tube

Intended for use with: DynaVap HyperDyn,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
MV StashBox + 8 Accessories
26 €

The MV StashBox is perfect for storing your portable vaporizer and accessories. It comes equipped with a combination lock to keep your items secure and a durable handle for easy transportation. The bag has a durable zip and removable Velcro dividers to help you organise your accessories according to your preferences.

Included with the MV StashBox are a 4-piece aluminium grinder, a tray, a glass container, a tube case, and three smell-proof plastic bags. These things fit perfectly inside the bag, and the tray can be stored in the durable mesh pocket up top.

Whether you're using it for storage at home or to bring things with you, your gear will always be safe, organised, and within reach.

Included:

  • Zip bag with combination lock (22 × 14 × 9 cm)
  • 4-piece grinder (aluminium)
  • Tray (18 × 15 cm)
  • Glass container
  • Tube case
  • Smell-proof zip bags (3)
  • Storage bag

Features

  • Latest version (2024.05)
  • "Big Bowl" design with 0.25 g capacity
  • Innovative dosing capsule
  • Full titanium construction
  • DuraDyn coating for scratch resistance
  • 10 mm and 14 mm tapers for water tool use
  • Modular compatibility with other DynaVap parts
  • Adjustable airflow via Hyper Tip and Hyper Cap connection
  • Seven unique airflow settings on condenser

Who is the DynaVap HyperDyn for?

The HyperDyn is designed for vape connoisseurs seeking a "session style" DynaVap experience. Its larger chamber and titanium construction is for users who want massive vapour and heavy clouds from their manual vaporizer.

If you're looking to push thermal extractions to the limit and enjoy longer sessions with fewer reloads, the HyperDyn is the perfect choice.

Massive vapour

The HyperDyn features a larger chamber volume, averaging 0.25 g capacity. This "Big Bowl" design allows for extended vaping sessions and reduces the need for frequent reloads. With approximately 2.5 times the capacity of the original DynaVap chamber, you can enjoy longer, more satisfying sessions without interruption.

The increased bowl size also allows for more efficient extraction of your herbs, ensuring you get the most out of every load. Whether you prefer light, flavourful hits or dense, potent clouds, the HyperDyn's larger chamber can accommodate your vaping style.

Innovative dosing capsule

The HyperDyn introduces a game-changing feature to the DynaVap lineup: compatibility with dosing capsules. Each HyperDyn comes with a Hyper Dosing Capsule, designed to fit seamlessly into the larger Hyper Tip chamber. These capsules have an average capacity of 0.125 g, allowing for precise dosing (perfect for microdosing) and easier loading.

Dosing capsules not only make vaping outside of your home more convenient, but they also keep your HyperDyn cleaner by containing your herbs.

For users who appreciate this feature, additional 5-packs of Hyper Dosing Capsules are available for purchase, ensuring you always have a pre-loaded capsule ready for your next session.

Durable titanium construction

Built from medical grade titanium, the HyperDyn is coloured and protected by DynaVap's DuraDyn technology. This ensures a clean, scratch-resistant look and guarantees long-lasting durability. The titanium construction also provides excellent heat retention and distribution, contributing to the HyperDyn's exceptional performance.

The use of titanium makes the HyperDyn lightweight yet incredibly strong, able to withstand the rigors of daily use and travel.

Ready for water cooled vapour

The HyperDyn boasts both 10 mm and 14 mm tapers, making it easy to use with various water tools, like bongs and bubblers. This versatility allows you to enjoy your vaping experience through your favourite glass tools, enhancing the cooling and filtration of your vapour.

Adjustable airflow for customised sessions

Airflow can be adjusted via the connection between the Hyper Tip and Hyper Cap. This allows you to fine-tune your draw resistance and vapor density to your liking. Additionally, the condenser features seven unique airflow settings, controlled by adjusting its depth within the mouthpiece.

These multiple airflow adjustment points give you unprecedented control over your vaping experience. You can easily switch between restricted draws for more concentrated flavor or open airflow for larger clouds, all without changing any parts.

Modular design

The HyperDyn remains compatible with previous DynaVap midsections, tips, and mouthpieces. This modularity allows for easy customisation and integration with existing DynaVap setups. You can mix and match parts to create your perfect vaporizer or easily replace components if needed.

Please note: The Hyper Cap only fits the Hyper Tip. This specialised design ensures optimal performance and compatibility between the cap and tip, delivering the enhanced vaping experience that the HyperDyn is known for.

Controlling the heat

The Hyper Cap is engineered to "click" when heated to the optimal vaporization temperature. The audible click takes the guesswork out of heating, making the HyperDyn suitable to both newcomers and experienced users.

Enhance your HyperDyn experience

Elevate your HyperDyn sessions with the Ispire Wand, a cutting-edge portable induction heater. This device offers precise temperature control from 120°C to 425°C in 5-degree increments, allowing you to tailor your vaping experience with unparalleled accuracy.

Featuring both manual and automatic modes, the Ispire Wand adapts to your preferred vaping style. Its USB-C charging and removable 2900 mAh batteries ensure extended use, while the option for external battery charging adds convenience. Whether you're at home or on the move, the Ispire Wand is the perfect companion to unlock the full potential of your HyperDyn.

How to use the HyperDyn

The HyperDyn is designed for simple and intuitive use. Follow these steps for an optimal vaping experience:

  1. Remove the Hyper Cap
  2. Load your herb into the Hyper Tip chamber/bowl
  3. Place the Hyper Cap back on the Hyper Tip
  4. Heat the Hyper Cap with a torch or induction heater until it clicks
  5. Inhale from the mouthpiece
  6. The Hyper Cap will click again when it has cooled down

For best results, rotate the HyperDyn while heating to ensure even temperature distribution. Experiment with different heating techniques to find your preferred vapour density and flavour profile.

DynaVap HyperDyn

In the Box

  • DynaVap HyperDyn vaporizer
  • Hyper dosing capsule
  • SlimStash XL: African Mahogany
DynaVap HyperDyn

Specifications

More Information
Size: 1.4 × 1.4 × 10.8 cm
Weight: 33 g
Heating: Hybrid (Convection+Conduction)
Heat-up time: 12 seconds
Power source: Torch or Induction
Temperature: 125°C to 230°C
Manufacturer: DynaVap
Warranty: 2 years
Country of manufacture: United States

Other vaporizers from DynaVap

  1. DynaVap M+ - Small
    Rating:
    88%
    DynaVap M+ (Plus)
    • Manually heated
    • Finless design for enhanced performance
    • Microdose-ready with adjustable bowl
  2. DynaVap M7 - Small
    Rating:
    96%
    (5)
    DynaVap M7
    • Manual heating for complete control
    • Textured stem for enhanced grip and heat dissipation
    • Available in XL size
  3. DynaVap VonG (i): Titanium - Small
    Rating:
    87%
    (3)
    DynaVap VonG (i): Titanium
    • Interchangeable parts
    • Great combined with water tools (10 & 14 mm)
    • Easy to keep clean