SKU
ignore-this-61
Receive an email when the product is back in stock.
 
  Out of stock
  20 or more in stock
DynaVap - DynaKit: Deluxe
23 €

The DynaKit: Deluxe by DynaVap is full of spare parts and cleaning products you can use to keep your DynaVap vape in top condition. Cleaning your vape is very rewarding and it also helps to keep the taste of your VapCap vapour optimal.

Included in this kit is the Honest Torch, a wind-resistant torch lighter perfect for heating your DynaVap vape, a fat mouthpiece, three titanium diffusers to filter the air, the DynaMag to provide touch-free handling of a hot cap, a small SnapStash to store herbs in and two storage tubes to transport your vape in.

To maintain your DynaVap vape this kit includes the DynaWax, five cotton pipe cleaners and two different sets of O-rings.

Includes:

  • Honest Torch (empty) (1)
  • Fat mouthpiece (1)
  • Titanium CCD (3)
  • DynaMag (1)
  • SnapStash (small) (1)
  • Storage tubes (2)
  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-Temp O-rings (5)

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
Ispire - The Wand (Induction Heater)
79 €

Features

  • Induction heating
  • Great at heating DynaVap vaporizers
  • Full temperature control (120°C to 425°C)
  • Borosilicate glass cups
  • Removable batteries (2 × 2900 mAh)
  • Safety features

The Wand by Ispire is a portable induction heater for use with concentrates, and in addition to that, it’s also great at heating the tips of DynaVap vaporizers.

What is induction heat?

Induction heat is a highly accurate, controllable, and more predictable heat source than the torches used normally used for this kind of vaping, so you’re going to experience consistency and less waste by eliminating over- or under-heating. Select any temperature you want in 5-degree increments, from 120°C to 425°C. 

Wand Glass Adapter for DynaVap vaporizers

If you plan on using the Wand with a DynaVap vaporizer, we recommend getting the Wand Glass Adapter so you can lodge the tip instead of having to swirl it around for even heat. With it, you no longer need to keep an eye on it and can use it hands-free. Just sit back and wait for the “click” of the Captive Cap.

Automatic and manual mode

You can use it in one of two modes, either manual mode or automatic mode. To use it in manual mode, hold the large button down until the cup or your DynaVap reaches your set temperature.

When you first hold the button down the Wand will blink with a red light, then once you put over something metal it will engage the induction heating and pulse a white light while it’s heating up. When it arrives at your set temperature the white light will stay on, meaning you can go ahead and enjoy whatever you're heating.

To use it in automatic mode, double press the large button, and then place it on the induction cup or put your DynaVap in it. One great thing about the automatic mode is that you can take it off and on throughout the cycle and it will just re-engage the heating, so you can sort of feather the heat while in use.

Removable batteries

The Wand is powered by two replaceable 2900 mAh batteries that can be charged with the included USB-C cable, or externally if you have a charger for 18650 batteries.

Includes

  • The Wand induction heater
  • Angled banger
  • Straight banger
  • Carb cap
  • Inner cup (2)
  • USB-C charger cable
  • Instruction manual
  20 or more in stock
The Wand - DynaVap Glass Adapter
18 €

This Glass Adapter is an accessory to The Wand induction heater that makes it easier to use it with DynaVap vaporizers. With it inserted, you can easily let the Captive Cap rest in it and just wait for it to heat up. No more swirling or looking for the right angle, just put the vape in and you are ready to get going in seconds.

Includes:

  • Silicone sleeve
  • Glass cup
  20 or more in stock
DynaVap - Bonger
9 €
 

The Bonger is the official DynaVap water pipe adapter made specifically for use with any DynaVap tip and Caps combination. Constructed from durable silicone, it easily connects your vaporizer to 10 mm or 14 mm male water pipe joints for enhanced, water-filtered vapour. 

The included stainless steel condenser tube provides a pure air path while cooling the vapour for smooth inhalation. Experience richer flavour profiles and ultra-smooth draws when you connect your DynaVap to water filtration with the Bonger!

How to use the Bonger

  • Insert DynaVap tip and the Cap into included condenser tube
  • Attach Bonger end to 10 mm or 14 mm male water tool
  • Inhale slowly and enjoy the cool, smooth vapour through the water pipe

Includes

  • Bonger adapter
  • Stainless steel condenser tube

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Honest Torch
5 €

The Honest Torch is the perfect lighter for precisely heating your DynaVap vaporizer. This refillable butane torch lighter has a single flame design that allows for targeted, controlled heating of the DynaVap tip.

With an easy-to-use ignition button and adjustable flame size, you can customise the intensity of your DynaVap sessions for your preferred vaporization experience. The ergonomic shape offers a comfortable non-slip grip during heating sessions.

A fuel window lets you monitor butane levels at a glance. The included cap attaches securely to the torch body with a chain when not in use so you can take your Honest Torch anywhere without worrying about it getting lost.

The Honest Torch ships without fuel, so butane will need to be added prior to first use. Be sure to use filtered butane specifically made for torches, as regular lighter gas (propane) is not compatible and may damage the torch.

Once filled with quality butane, the Honest Torch delivers reliable high performance to precisely heat your DynaVap for unforgettable vape sessions.

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  Out of stock
Cyclone Triple Torch
9 €

The Vertigo Cyclone Triple Torch is one of the most budget friendly torch lighters you will ever find. It features a large, clear fuel tank so you’ll always know how much fuel remains and it also makes refilling it a lot easier. The wind resistant flame is capable of lighting at 3'500 meters above sea level.

Fill it with filtered butane gas, available at hobby stores and Amazon, before use (not included). We recommend using the brand Colibri but any butane gas that has been filtered at least five times should work well. 

Please note that regular lighter gas (propane), is not compatible with torches. Torches need filtered butane gas to deliver their high performance.

Do not clean the Cyclone Triple Torch with alcohol as this will degrade the plastic, resulting in fuel leaks.

  Less than 20 in stock
Duality Torch
26 €

The Duality is a high-quality butane torch lighter. It has a pocket-proof ignition and a single or double flame to choose from depending on your preference. It also features a large tank window that allows you to keep an eye on the fuel level, as well as making it easy to refill it without issue. The flame can be adjusted with the dial at the bottom and the flint ignition can be replaced if it gets worn out.

It ships empty so you need to add butane gas to it before you can use it.

Please note that regular lighter gas (propane), is not compatible with torches. Torches need filtered butane gas to deliver their high performance.

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Armored Cap
24 €

Upgrade your DynaVap vaporizer with the Armored Cap and take your vaping experience to the next level.

The Armored Cap features a Captive Cap encased in a stainless steel shell designed to provide more thermal mass, so you can enjoy longer heat cycles and require fewer cycles to fully vaporize your material. Plus, you won't need to spin the unit while heating to ensure even and full vaporization of your herbs.

To be compatible with most DynaVap models, the Armored Cap retains the classic look and design of the Captive Cap, including the built-in digger tool. It has a sleek matte grey finish that will develop a beautiful patina over time. You can easily aim your flame at the mini logo for consistent and satisfying vapour every time.

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - DynaStash (Walnut)
32 €

The DynaStash is the perfect complement to a DynaVap vape. It has a large compartment to hold a generous amount of herbs which makes it super easy to load your DynaVap. All you have to do is press your DynaVap into the material, twist, and then you are ready to start vaping!

It also features another compartment to store your DynaVap, so you have everything you need (except the heat source) in one place. On top of the DynaStash is a strong magnet that can be used to store your DynaVap when not in use, as well as to help cool it down between hits.

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7 and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - SlimStash (African Mahogany)
11 €

Store your DynaVap vape in this sleek SlimStash made from African Mahogany wood. This Stash contains a compartment for your standard length (92 mm) device and is made from sustainably sourced wood.

Fits the Following DynaVap Items:

  • "M"
  • VonG
  • NonaVonG-S
  • BB3
  • Galaxy Glass Bodies
  Less than 20 in stock
DynaVap - DynaKit: Maintenance
13 €

The DynaKit: Maintenance helps you clean your DynaVap vape quickly and efficiently. The included DynaWax should be used to keep the O-rings well lubricated.

Since O-rings are small and easy to lose, this kit includes eight additional ones. There are two different types of O-rings that come with the DynaKit Maintenance; condenser O-rings and high-temperature O-rings.

Includes:

  • DynaWax (1)
  • Cotton pipe cleaners (5)
  • Condenser O-rings (3)
  • High-temperature O-rings (5)

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - DynaCoil
17 €

The DynaVap DynaCoil is designed to fit inside the Cap of your DynaVap vape letting you use it with your favourite concentrates or other sticky substances. To use it, all you need to do is to remove the herb screen from your cap, insert the DynaCoil, place your concentrate directly on the coil, heat, and enjoy.

Note that the DynaCoil arrives rolled up and shouldn't be unrolled for any reason.

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Fat Mouthpiece
2 €

The DynaVap Fat Mouthpiece will fit onto the end part of all DynaVap models. It can be used as an extra mouthpiece for sharing among friends or it can be used as a water pipe adapter, fitting all female 14 mm connections which enables you to easily turn your DynaVap vape into a water-cooled vaporizer.

Please note - the Fat Mouthpiece will not fit into the opening of the DynaStash, you must remove it before placing your DynaVap into the DynaStash.

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - XL Condenser Kit
17 €

The XL Condenser Kit from DynaVap comes with a spinning mouthpiece of wood and all required O-rings. By adding a mouthpiece and 17 mm of length it helps provide a more even temperature when heating.

Includes:

  • XL condenser (dark wood)
  • O-rings (3)

Intended for use with: DynaVap M.

  20 or more in stock
DynaVap - Stainless Steel Screens (3-pack)
5 €

The Stainless Steel Screens go in between the chamber and the tip of the VapCap to keep the vapour pure and free from fine particles from your herbs. These screens are compatible with both the titanium and stainless steel tips.

Includes:

  • Stainless steel screens (3)

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Low Temp. Captive Cap
15 €

The DynaVap Low Temp. Captive Cap provides a whole new experience with your DynaVap VapCap vape. By clicking earlier in the heating cycle, it helps you be more consistent with your heating times, enabling you to vape your herbs with less risk of combustion and enjoy a more complex flavour profile. The Low Temp. Captive Cap also comes with a unique logo on it to differentiate it from your standard Captive Cap.

The DynaVap Low Temp. Captive Cap was designed for the DynaVap VapCap M but will fit any VapCap. If you’re looking for cooler vapour, or want to experience more flavour from your herbs this is a great accessory to have.

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
DynaVap - Captive Cap
15 €

The new DynaVap Captive Cap helps keep the cap in place while also allowing for a more even distribution of the airflow. If you’ve ever had the cap get dislodged off of your DynaVap during a heat up, you’ll really appreciate the new design of this cap. The “click” you hear when the vape has heated up, or cooled down is also more distinct and easier to hear.

The DynaVap Captive Cap was designed for the DynaVap VapCap M but will fit any VapCap. If you’re looking for a replacement cap or just want something new, the Captive Cap is a great option.

Intended for use with: DynaVap M,  DynaVap M+ (Plus),  DynaVap M7,  DynaVap Omni and DynaVap VonG (i): Titanium.

  20 or more in stock
MV StashBox + 8 Accessories
26 €

The MV StashBox is perfect for storing your portable vaporizer and accessories. It comes equipped with a combination lock to keep your items secure and a durable handle for easy transportation. The bag has a durable zip and removable Velcro dividers to help you organise your accessories according to your preferences.

Included with the MV StashBox are a 4-piece aluminium grinder, a tray, a glass container, a tube case, and three smell-proof plastic bags. These things fit perfectly inside the bag, and the tray can be stored in the durable mesh pocket up top.

Whether you're using it for storage at home or to bring things with you, your gear will always be safe, organised, and within reach.

Included:

  • Zip bag with combination lock (22 × 14 × 9 cm)
  • 4-piece grinder (aluminium)
  • Tray (18 × 15 cm)
  • Glass container
  • Tube case
  • Smell-proof zip bags (3)
  • Storage bag

DynaVap M Features

  • Choose between stainless steel and titanium build
  • Perfect for microdosing
  • Unique “clicking” cap
  • Hybrid heating
  • Designed and manufactured in USA

Who is the DynaVap M for?

The VapCap M by DynaVap is perfect for anyone looking for an easy-to-use, manually controlled vape with a practically indestructible build. The simple design produces tasty, reliable vapour and allows for stealthy vape sessions where other vaporizers would draw too much attention.

What’s new with the “M” edition?

To ensure maximum flavour, the DynaVap M is still constructed from medical grade stainless steel or titanium but it now features the new “Captive Cap” with two small indentations near the end to keep the cap securely in place without affecting the airflow.

Manually controlled

The DynaVap M can be heated by practically any external heat source, such as a torch or induction heater. Thanks to this ingenious design it can deliver powerful and tasty draws from tiny amounts of herbs, instantly. The ‘cap’ makes an audible click when it has have reached the minimum temperature and is ready to start the vapour production.

With the DynaVap M’s manual heating, you’re in complete control of the vapour density. Create fast and light vapour, or a thick and heavy vapour, depending on where you heat the cap. Even with the small bowl size, every hit is full of potency and flavour.

Custom bowl size

If you like to match your herb consumption with the occasion you will appreciate that the DynaVap M bowl has two settings - 0.1 grams and 0.05 grams. Perfect for microdosing! The bowl is surprisingly effective, even with small amounts of herbs loaded. It's also quick to reload, so you can vape the next bowl quickly after finishing the last one.

It’s capable of vaporizing the entire bowl in 1 to 2 draws but if you don’t finish you can even return to the same bowl later since the DynaVap M does not heat your herb between inhales.

Convenient to bring everywhere

The DynaVap M is 9 centimetres long and weighs only 19 grams, which makes it one of the smallest vape on the market. It’s not just the perfect vaporizer for festivals and camping, it’s also ideal for any traveller as the and the only other things you need are a lighter and some herbs. No other portable herb vaporizer offers such instant and powerful vapor at such a reasonable price.

How to use it?

Load the DynaVap M by either adding your herbs to the top or press the tip in the herbs a few times to load it. Use your finger to dust off any excess herbs and put the cap on.

Once your bowl is filled, heat the cap with either a torch or an induction heater until you hear the famous DynaVap “click” that lets you know it’s ready to be used. You can control the airflow by covering the air intake while hitting for thicker vapour, or leave it uncovered for lighter and smoother draws.

Warranty

All DynaVap M vaporizers sold by MagicVaporizers, an authorised distributor of DynaVap products, are authentic and backed by a 2-year warranty, restricted to normal use.

DynaVap M

In the Box

  • DynaVap VapCap M vaporizer
DynaVap M

Specifications

More Information
Size: 1.2 × 1.2 × 9.2 cm
Weight: 20 g
Heating: Hybrid (Convection+Conduction)
Heat-up time: 12 seconds
Power source: Torch or Induction
Temperature: 150°C to 230°C
Manufacturer: DynaVap
Warranty: 2 years
Country of manufacture: United States

Other vaporizers from DynaVap

  1. DynaVap M+ - Small
    DynaVap M+ (Plus)
    • Manually heated
    • Finless design for enhanced performance
    • Microdose-ready with adjustable bowl
  2. DynaVap M7 - Small
    DynaVap M7
    • Manual heating for complete control
    • Textured stem for enhanced grip and heat dissipation
    • Available in XL size
  3. DynaVap Omni - Small
    Rating:
    90%
    (4)
    DynaVap Omni
    • Manually heated
    • Adjustable bowl and airflow
    • Made of titanium
  4. DynaVap VonG (i): Titanium - Small
    Rating:
    87%
    (3)
    DynaVap VonG (i): Titanium
    • Interchangeable parts
    • Great combined with water tools (10 & 14 mm)
    • Easy to keep clean